Seacole Specialty Chemical Hires New Purchasing Agent to Support Vendor Relationships
Allin Moroney brings nearly a decade of purchasing and relationship-building expertise and experience to the Seacole team.
This author has not written his bio yet.
But we are proud to say that Amanda Lanser contributed 56 entries already.
Allin Moroney brings nearly a decade of purchasing and relationship-building expertise and experience to the Seacole team.
In January 2023, Seacole Specialty Chemical hired Angell Field as its talented new Director of Office Operations.
From salt and slush to dust, cold weather presents unique cleaning difficulties. Here are three common industrial cleaning challenges companies [Read More]
The Seacole team is looking forward to a festive time off at the end of the month. And if your [Read More]
Many industries, including the military, electronics, and medical sectors, demand high-quality surface finishing of their parts. When components are delicate, [Read More]
Corrosion is one of the costliest challenges for precision parts manufacturing. Improper humidity, temperature, or process time can create destructive [Read More]
A rectifier is one of the largest investments any surface finishing company will make. One key factor that can extend [Read More]
Tanks are used in nearly every step of the surface finishing process, from plating and rinsing to storage. Every step [Read More]
As an NACD member, Seacole is committed to the guiding principles of Responsible Distribution, a mandatory third-party verified environmental, health, [Read More]
The Seacole surface finishing team had a wonderful, learning-filled week at SUR/FIN last month. One of the most valuable seminars [Read More]
You’ve installed fire extinguishers around your kitchen, keep a clean griddle and oven, and properly train your staff. You’ve got [Read More]
Last month, Seacole founder and CEO Gregg Elliott was a panelist for Enterprise® Minnesota State of Manufacturing® event. Key Findings [Read More]
Seacole founder and CEO Gregg Elliott was honored to be a part of the expert panel at this year’s State [Read More]
The Seacole surface finishing team is looking forward to three days of training, education, and networking at the annual SUR/FIN [Read More]
Earlier this month, we shared how titration testing often solves poor-quality parts cleaning. But sometimes, parts cleaning operations continue to [Read More]
Quality assurance departments can spend a lot of time, resources, and money trying to figure out why their parts cleaning [Read More]
Plated aluminum is notorious for its susceptibility to corrosion. When it undergoes NSS testing, aluminum plated with electroless nickel often [Read More]
Are you ready for two action-packed days of all things paint and powder coating? The Seacole team is! Seacole is [Read More]
If you’re a professional cleaning contractor, the best time to add new customers is right around the corner. Here are [Read More]
We had a chance this month to catch up with marketing coordinator Anna Luckow. Anna works on Seacole’s marketing initiatives, [Read More]
You don’t have to wait until spring to take care of your industrial cleaning challenges. Cold weather presents its own [Read More]
We’re recertified! Seacole recently upgraded its ISO certification to the enhanced 9001:2015 guidelines. Our upgraded certification bolsters our already strong [Read More]
Did you know that Seacole is celebrating its 15-year anniversary? It’s true! In 2002, our CEO and owner Gregg Elliott [Read More]
We had a chance this month to catch up with surface finishing account manager and newest Seacole employee Pat Haugen. [Read More]
We’ve decked the halls at Seacole and we’re all settling in for some festive time off at the end of [Read More]
Recent winter storms brought ice and snow to Minneapolis, Boston, and Houston. Many property owners were caught unprepared for the [Read More]
Sometimes, cleaning and brightening copper alloys seems more like an art than a science. The slightest adjustment in your process [Read More]
It’s November, and winter is just around the corner. Many property owners and snow removal companies are digging out shovels [Read More]
With decades of experience helping manufacturers find solutions to their industrial cleaning challenges, the Seacole team has seen it all. [Read More]
We had a chance this month to catch up with inside sales and product development specialist Heather Thornberg. Heather builds [Read More]
The boating season may be winding down, your boat cleaning company’s busy season is just getting started. Without the right [Read More]
Direct-contact water heaters have revolutionized the concrete industry. Your concrete pouring season is no longer at the mercy of Old [Read More]
We had a chance this month to catch up with surface finishing manager Bill Blanchet. Bill supports the Seacole sales [Read More]
Municipalities across the country are tamping down on the amount of phosphorus and its derivatives that can be discharged in [Read More]
With a speaker lineup that featured the “Who’s Who” in the products finishing world, valuable industry training, and a well-organized [Read More]
We had a chance this month to catch up with inside sales manager Wayne “Andy” Anderberg. Andy helps our customers [Read More]
It’s sunny, warm, and your chore list is already fairly long. Why not put off the maintenance on your heavy [Read More]
Slip and fall accidents are becoming huge liabilities for industrial facilities of all kinds. Spilled oils, lubricants, paints, and other [Read More]
We had a chance this month to catch up with surface finishing account manager Jim Mayer. Jim helps our customers [Read More]
Seacole is proud to be a member of the National Association of Surface Finishing (NASF), the trade association for the [Read More]
You’re cruising down the freeway when suddenly—SPLAT!—a bug the size of Rhode Island hits your windshield. Bugs on your windshield, [Read More]
We had a chance this month to catch up with industrial cleaning new business development manager Paula Anderson. Paula helps [Read More]
Clean farm equipment not only looks great, it works more efficiently and is less prone to rust and other deterioration. [Read More]
Printed circuit board manufacturing is a complicated process with many steps, which means there’s a lot of room for error. [Read More]
We had a chance this month to catch up with printed circuit board account manager Walt Forgacs. Walt’s been a chemist [Read More]
We had a chance this month to catch up with surface finishing account manager Jim Jordan. Jim holds a chemical [Read More]
Electroless nickel plating is an alternative process to electroplating. It reduces your facility’s water and energy use and cuts down [Read More]
Manufacturers must clean their metal, glass, and plastic parts before they can be assembled in an engine or other piece [Read More]
Parts cleaners, corrosion inhibitors, defoamers, degreasers, detergents, and descalers—Seacole Specialty Chemical can formulate an industrial cleaner for your industrial process. [Read More]
Seacole is a proud member of the National Association of Chemical Distributors (NACD). As a supplier of specialty chemicals, we’re [Read More]
For 15 years, Seacole Specialty Chemical has been your resource for highly specialized chemical products that support every stage of [Read More]
Chemical manufacturer Seacole uses ISO to help ramp up to $35 million in revenue By Lynn Shelton Enterprise Minnesota’s Director [Read More]
On September 30th, Seacole was granted ISO certification. The International Organization for Standardization (ISO) provides strategic tools and guidelines to [Read More]
On October 5th, Seacole employees geared up for the start of National Customer Service Week (NCSW). The theme of this [Read More]